When there are staples in the staple head of the nail box machine, it is easy to affect the normal operation of the clutch. You can disassemble the side cover of the staple head to take out the punch for cleaning and cleaning, and reinstall it after adding lubricating oil;

If the positioning of the staple head is inaccurate, you can check whether the F3 fuse 34-35 (AC), F9 fuse 50-51 (DC) and the brake coil resistance wire (15Ω) are normal; if the nail head has continuous nailing action, To check whether the electrical appliances are damaged.

       If the photoelectric induction of the baffle board is abnormal, the photoelectric induction device can be adjusted to keep the sensing distance at an appropriate level to ensure that the baffle board can operate normally after the cardboard is fed.

In order to reduce the occurrence of the above problems, the following points should be paid attention to: use high-quality flat wire with good rigidity and smooth surface coating; check whether the various parts of the feeding wire are adjusted incorrectly and cause jams; adjust the relevant parts of the machine to keep the feeding movement easily and freely Appropriate; take corresponding repair or replacement measures for the severely worn bottom mold.